d-800

• Simultaneous automatic and manual cleaning
• For solvent and aqueous
• Brush-driven pump with closed-loop cleaner flow
• Manual rinsing with new cleaning product
• Spray channel with air exhaust
• Efficient air exhaust system
• Automatic cleaning with timer including automatic rinsing
• Pressurized air purge system to protect the guns during the automatic cleaning process
• Extra cleaning results, with 12 spray nozzles on each side
• Ergonomic construction designed to allow convenient front operation
• All features fully adjustable
• Air connector with air gun

Optional:

• washing capacity for 2 guns simultaneously
• Pneumatic

ud-800

• Simultaneous automatic and manual cleaning
• For solvent or aqueous
• Brush-driven pump with closed-loop cleaner flow
• Manual rinsing with new cleaning product
• Spray channel with air exhaust
• Efficient air exhaust system
• Automatic cleaning with timer including automatic rinsing
• Pressurized air purge system to protect the guns during the automatic cleaning process
• Extra cleaning results, with 12 spray nozzles on each side
• Ergonomic construction designed to allow convenient front operation
• All features fully adjustable
• Air connector with air gun

Optional:

• washing capacity of 2 guns simultaneously
• Pneumatic exhaust solvent economizer, ATEX version

S.U.M.O.

• Modular equipment with customization options
• Robust construction – possible wall installation
• Basic module made of stainless steel
• Basic module including air exhaust system and air gun
• Two large cleaning compartments
• Pressurized air purge system to protect the guns during the automatic cleaning process
• Individual and independent configuration of both cleaning compartments with:
  • Automatic cleaning with timer
  • Automatic clean rinse
  • Brush-driven pump with closed-loop cleaner flow
  • Manual rinsing with new cleaning product
  • For solvents or aqueous

Optional:

• Pneumatic exhaust solvent economizer, ATEX version

Starter-01

• Robust construction – possible wall installation
• Automatic and manual cleaning
• Efficient air exhaust system
• Cabin and relevant cleaning parts made of stainless steel
• Brush-driven pump with closed-loop cleaner flow
• Manual rinsing with new cleaning product
• For solvents or aqueous
• Pressurized air purge system to protect the guns during the automatic cleaning process

Optional:

• Base cabinet with door, galvanized
• Pneumatic exhaust solvent economizer, ATEX version

k-800

• Left side for manual cleaning of water-based paints, right side for automatic and manual cleaning of solvent-based paints
• Space-saving – only 1200 mm wide
• Extra cleaning results
• Easy handling
• Includes coagulation kit and filters
• Ergonomic construction designed to allow convenient front operation
• All relevant cleaning parts made of stainless steel
• All features fully adjustable
• Includes door to base
• Self-cleaning rinse on the solvent side

Optional:

• Pneumatic exhaust solvent economizer, ATEX version

m-800

• Large work area for manual cleaning
• Efficient air exhaust system
• Brush-driven pump with closed-loop cleaner flow
• Manual rinsing with new cleaning product
• All relevant cleaning parts made of stainless steel
• Ergonomic construction designed to allow convenient front operation
• For solvents or aqueous
• Air connector with air gun
• All features fully adjustable

Optional:

• Pneumatic exhaust solvent economizer, ATEX version

w-800-1 / w-800-2

• All relevant cleaning parts made of stainless steel
• Ergonomic construction designed to allow convenient front operation
• Splash Guard
• Brush-driven pump with closed-loop cleaner flow
• Rinsing gun
• Pneumatic coagulation device
• Air connector with air gun
• Coagulation kit and filters included
• w-800-2 – without pumps for water connection on site

Optional:

• Door to cover the base

SPEEDBOX 1

• Compact device for wall installation
• Quick color change and manual internal cleaning of spray guns using disposable cups
• Includes air exhaust system with spray containment compartment
• Made of stainless steel
• Installation inside and outside the spray booth possible due to the air exhaust system
• All features fully adjustable
• No fluid can penetrate the filter pads
• For all painting systems
• Storage space for up to 4 cups

SPEEDBOX 2

• Compact device for wall installation
• For automatic internal cleaning of spray guns
• Cleaning inside a closed circuit system
• The pressurized air purge system protects the spray guns during the automatic cleaning process – no need to remove the air caps
• For water-based paints only
• Designed for use with disposable cup systems inside the spray booth
• Significantly better cleaning results compared to the manual process between paints
• No contamination of the filter pads, as cleaning fluids are in a closed circuit
• Closed circuit cleaning – lower consumption of cleaning products

SPEEDBOX 3

• Probably the smallest gun washing machine in the world – with the greatest ease of use
• Automatic cleaning of internal and external spray gun
• For solvents outside the spray booth, for water-based cleaning fluids inside the spray booth
• Spray gun cleaning, including cup and lid
• Efficient air exhaust system
• The pressurized air purge system protects the spray guns during the automatic cleaning process – removal of the air caps is not necessary

K-1200

• Two separate gun wash zones in the same compartment
• Two separate closed-loop cleaning systems
• Shorter cleaning process with excellent results
• Efficient air exhaust system
• Automatic and manual cleaning in the same compartment
• Pressurized air purge system to protect the guns during the automatic cleaning process
• Ergonomic construction designed to allow convenient front operation
• Modular concept saves space and allows easier handling
• For solvents or aqueous
• All features fully adjustable

Optional:

• Pneumatic exhaust solvent economizer, ATEX version

M-1200-1 / M-1200-2

• Large work space allows parts up to 1200 mm long to be cleaned
• All features fully adjustable
• Brush-driven pump with closed loop cleaner flow
• Manual rinsing with new cleaning product
• Efficient air exhaust system
• Low solvent consumption
• For solvents or aqueous
• M-1200-2
• Two brushes and two manual rinses for two painters at the same time

Optional:

• Pneumatic exhaust solvent economizer, ATEX version

M-1200-TW

• Manual washer for heavy spray gun with two immersion tanks and two baskets
• Combination of compact washer for immersion and washing
• For solvents or aqueous
• Stainless steel flap with automatic activation of exhaust air
• Two immersion tanks (each 250 x 400 x 250 mm)
• Two immersion baskets
• Basket claws set
• Two removable tank covers made of stainless steel
• A ¾ “drain tap in each tank
• Manual cleaning station with driven pump and adjustable flow brush
• An air gun with air hose
• Manual rinsing with new cleaning product
• Exhaust air hose

Option:

• Pneumatic exhaust solvent economizer, ATEX version

M-800-TW

• Space-saving hand washer with a dip tank and basket
• For solvents or aqueous
• Stainless steel flap with automatic activation of exhaust air
• Dip tank dimensions: 240 x 240 x 130 mm (L x W x H incl. Basket)
• An air gun with air hose
• Exhaust air hose

Options:

• Flow brush with pump
• Clean manual rinse
• Pneumatic exhaust solvent economizer, ATEX version

T-1200-1 / T-1200-2

• Large work area with powerful B-TEC air exhaust system for handling paints and / or solvents
• For the preparation of paint and spray guns
• Keeps your workplace organized and reduces VOC values
• T-1200-2 – two stable storage shelves made of stainless steel

Optional:

• Stainless steel flap with automatic air exhaust activation
• Pneumatic exhaust solvent economizer, ATEX version

Modular Design

• All products in the industrial line can be combined perfectly and functionally
• Its design allows the user to create the necessary configuration to meet their requirements
• All units are made of stainless steel
• Designed for the toughest operating conditions
• All products in the industrial line can be used with solvent and / or water based paints
• Spray gun washers, work tables and other accessories from B-TEC can be combined individually and have perfectly suitable dimensions
• Save space with optimized functionality!

• Cleaning the disposable cup system for reuse
• Patented system
• Developed for use with non-flammable liquid water based cleaners
• No need for exhaustion
• Flexible mounting location
• Only 10-12 minutes of cleaning time
• Little use of detergents thanks to prewash and rinse
• Washing areas entirely in stainless steel, zinc-based
• 900x655x1010 mm without draining container
• 1245x655x1010 mm with draining container